Welcome to the Road to Pro Challenger Divisions 2019 - In this series you can compete with overclockers from around the globe who use the same hardware. This season features three two-month rounds each with four different stages. Good luck!
Accumulate the most points in the different stages of the season rounds and become the Division Champion. In Challenger Division I round 1 the processor choice is limited to Core i7 series (non-HEDT). The graphics card choice is limited to single GPU graphics cards (excl Titan). You can find more information about restrictions on the competition stage pages.
| Rank | Participant | 3DMark11 Physics | GPUPI v3.3 for CPU - 100M | SuperPi - 32M | HWBOT x265 Benchmark - 1080p |
PTS
|
| 1 | 50 pts | 50 pts | 48 pts | 48 pts | 196 pts | |
| 2 | 48 pts | 48 pts | 30 pts | 46 pts | 172 pts | |
| 3 | 40 pts | 42 pts | 38 pts | 44 pts | 164 pts | |
| 4 | 46 pts | 46 pts | 32 pts | 38 pts | 162 pts | |
| 5 | 44 pts | 40 pts | 28 pts | 34 pts | 146 pts | |
| 6 | 28 pts | 44 pts | 34 pts | 28 pts | 134 pts | |
| 7 | 34 pts | 36 pts | 26 pts | 36 pts | 132 pts | |
| 8 | 26 pts | 32 pts | 46 pts | 26 pts | 130 pts | |
| 9 | 38 pts | 38 pts | 22 pts | 32 pts | 130 pts | |
| 10 | 32 pts | 30 pts | 16 pts | 50 pts | 128 pts | |
| 11 | 30 pts | 34 pts | 30 pts | 94 pts | ||
| 12 | 22 pts | 26 pts | 20 pts | 20 pts | 88 pts | |
| 13 | 28 pts | 36 pts | 24 pts | 88 pts | ||
| 14 | 40 pts | 42 pts | 82 pts | |||
| 15 | 18 pts | 22 pts | 24 pts | 14 pts | 78 pts | |
| 16 | 24 pts | 18 pts | 14 pts | 22 pts | 78 pts | |
| 17 | 20 pts | 18 pts | 18 pts | 56 pts | ||
| 18 | 50 pts | 50 pts | ||||
| 19 | 44 pts | 44 pts | ||||
| 20 | 42 pts | 42 pts | ||||
| 21 | 42 pts | 42 pts | ||||
| 22 | 40 pts | 40 pts | ||||
| 23 | 24 pts | 12 pts | 36 pts | |||
| 24 | 36 pts | 36 pts | ||||
| 25 | 20 pts | 20 pts | ||||
| 26 | 16 pts | 16 pts |
| Rank | User | Season Points |
| 1 | 100 | |
| 2 | 79 | |
| 3 | 62 | |
| 4 | 49 | |
| 5 | 39 | |
| 6 | 30 | |
| 7 | 24 | |
| 8 | 20 | |
| 9 | 17 | |
| 10 | 14 | |
| 11 | 12 | |
| 12 | 11 | |
| 13 | 10 | |
| 14 | 10 | |
| 15 | 10 | |
| 16 | 10 | |
| 17 | 10 | |
| 18 | 10 | |
| 19 | 10 | |
| 20 | 10 | |
| 21 | 10 | |
| 22 | 10 | |
| 23 | 10 | |
| 24 | 10 | |
| 25 | 10 | |
| 26 | 10 |
Oldscarface
hello, could we put the GPUPI 3.2/3.1? because with the 3.3 we can only run in legacy (32bits)
if everybody runs legacy is it a problem ? I wanted to have quicker runs on the older hardware
Having quicker runs on the older hardware is going to save a lot of time. As well as increase the sub numbers for GPUPI for CPU v3.3. So hopefully we will see the point value increase. That would be a good thing for the old school benchers out there. Nice call Leeg
with some opencl it's complicated with the 3.3 in 32bit there are a lot of bugs, the 3.2/3.1 works very well why this complicate life? and in 32bit we are about 50% less efficient
which cps are you talking about ?
AMD FX
how do you want to do this?
Current format stays. 3.3 it is
okay
Points? Currently v3.3 doesn't give any points for 2D other than team power points. Only GPU Pi v3.3 on GPU's got points.
Increased subs for v3.3 wouldn't hurt though!
Yea I noticed that. Lol But as long as there is some form of points given for the bench it's all good. I know that some folks out there don't bench on an active team, so it useless for them. However, for those who bench with an active team, it will help that team out for sure.
True enough. Here's hoping that CPU gets points too. So odd that only GPU got points for that, but they're also pimping v3.3 CPU subs in Divisions.
Might happen in the future when the final rev gets released.
Is CPUID HW valid for monitoring?
arrr he bug cpu temperature is always 0 while the cpu is 20...
Hey mate, I had the same problem but it only happen for me when I enable CPU core unlocked....when I disabled CPU core unlock the temp work in Windows with CPUid HW, this was with my 960t. I can't remember if it was the same for my 1090t
Have you tried OHM ( which is in the X265 folder)
Unlocking cores on AMD always bugs temp sensors. Known issue. There is no software fix for that.
without unlocking as well they dont read right !!!!!
They don't even read when I unlocked....
true bully.seems to be an amd failure somewhere, dunno why.all my amd boards are the same,, regardless of what generation,
hope all is well mate ?
Hope your well to mate
Are AM3+ Opterons allowed (does "no server" mean just server platforms)?
I'd assume not
I'd take hardware to mean CPUs, Boards, GPUs and potentially Memory.
Well we can open up the AMD Legacy stage too maybe for single CPU server CPU setups.
What do you guys think?
Log in or register to comment